8 x Gigabit Ethernet Access
Our 8 x Gigabit Ethernet Access Module delivers maximum flexibility in your network design with eight simultaneous IP connections. You have total control over bandwidth in 0.5 Mbps increments, allowing you to allocate exactly the right amount of network resources to each node.
The Ethernet Switching feature delivers an unprecendented level of flexibility that allows you to transport any service to any network location.
| Form factor: |
Plug-in unit for Nimbra 600 series switches
1 interface slot
Selectable 5 or 10 Gbps backplane allocation |
|
Interface options:
Small Form-factor
Pluggable (SFP) |
1000BASE-SX (MM, 850 nm 550m)
1000BASE-LX (SM, 1310 nm, 10 km)
1000BASE-ZX (SM, 1550 nm, 70 km)
1000Base-T (UTP, Cat 5, 100m)
|
|
Mapping:
QoS channelization
ETS Channel cap. |
ETS (Ethernet Transport Service) according to
ETSI ES 201 803-7, up to 248 ETS channels per board
n x 512 kbps (n=1 to 18431)
|
|
Supported standards:
IEEE 802.1Q
IEEE 802.1p
RFC2474
IEEE 802.1D-2004 |
Virutal LANs
Ethernet Precedence
Diffserv Precedence
MAC Bridges
|
|
Frame storage:
Packet memory
Max frame size |
64 MB
9 kB (jumbo frames)
|
| Fault management: |
Communication/Equipment alarms |
|
Performance management: |
MIB-2/RMON counters statistics group |
|
Maintenance:
Hardware
Firmware |
Hot-swap
Remote download
|
|
Environmental conditions:
Operating temperature
(short term)
Storage temperature
Relative humidity |
5 to 40 ºC (41 to 104 ºF)
-5 to 55 ºC (23 to 131 ºF)
-40 to 70ºC (-40 to 156 ºF)
10% to 90% (non-condensing)
|
|
Power consumption: |
<40W |
|
Regulatory compliance:
Safety
EMC
CE marking
FCC
Laser safety
Evironment |
IEC/EN 60950-1
ETSI EN 300 386
93/68/EE
Part 15 sub-part B
CFR 21 1040.10/11
RoHS directive 2002/95/EC
|
|
Management:
Element Management
Network Manegement |
Command Line Interface (CLI) and Web GUI
Nimbra Vision™ or 3rd party NMS over SNMP v1/v2c/v3
|