8 x Gigabit Ethernet Access
The 8-port Gigabit Ethernet Access Module is a high capacity Metro Ethernet interface for seamless integration of IP based services into a Nimbra MSR media network.
With the 8 x Gigabit Ethernet Access Module, it is possible to combine the cost-efficient high-speed data transport associated with Gigabit Ethernet, with the guaranteed Quality of Service and bandwidth-on-demand characteristics of the Nimbra MSR solution.
| Form factor: |
Plug-in unit for Nimbra 600 series switches
1 interface slot
Selectable 5 or 10 Gbps backplane allocation |
|
Interface options:
Small Form-factor
Pluggable (SFP) |
1000BASE-SX (MM, 850 nm 550m)
1000BASE-LX (SM, 1310 nm, 10 km)
1000BASE-ZX (SM, 1550 nm, 70 km)
1000Base-T (UTP, Cat 5, 100m)
|
|
Mapping:
QoS channelization
ETS Channel cap. |
ETS (Ethernet Transport Service) according to
ETSI ES 201 803-7, up to 248 ETS channels per board
n x 512 kbps (n=1 to 18431)
|
|
Supported standards:
IEEE 802.1Q
IEEE 802.1p
RFC2474
IEEE 802.1D-2004 |
Virutal LANs
Ethernet Precedence
Diffserv Precedence
MAC Bridges
|
|
Frame storage:
Packet memory
Max frame size |
64 MB
9 kB (jumbo frames)
|
| Fault management: |
Communication/Equipment alarms |
|
Performance management: |
MIB-2/RMON counters statistics group |
|
Maintenance:
Hardware
Firmware |
Hot-swap
Remote download
|
|
Environmental conditions:
Operating temperature
(short term)
Storage temperature
Relative humidity |
5 to 40 ºC (41 to 104 ºF)
-5 to 55 ºC (23 to 131 ºF)
-40 to 70ºC (-40 to 156 ºF)
10% to 90% (non-condensing)
|
|
Power consumption: |
<40W |
|
Regulatory compliance:
Safety
EMC
CE marking
FCC
Laser safety
Evironment |
IEC/EN 60950-1
ETSI EN 300 386
93/68/EE
Part 15 sub-part B
CFR 21 1040.10/11
RoHS directive 2002/95/EC
|
|
Management:
Element Management
Network Manegement |
Command Line Interface (CLI) and Web GUI
Nimbra Vision™ or 3rd party NMS over SNMP v1/v2c/v3
|