Nimbra 360 Flexible DTV and Mobile TV Distribution Switch
The Nimbra 360 was developed to support the particular needs of DVB and Mobile TV networks. It incorporates configurable trunk and Gigabit Ethernet ports. You can connect the system to virtually any trunk circuit and network. The chassis offers two slots for video and audio interfaces or additional trunk ports. Our unique Time Transfer function allows DTT and Mobile broadcasters using single frequency networks to synchronize transmitters and provide inter-studio sync without relying on GPS satellite signals or using any external devices.
| Dimensions: |
H: 88 mm (3.5"), W: 445 mm (17.5"), D: 240 mm (9.4")(ETSI 300) |
| Number of slots: |
2 |
| Switch capacity: |
5 Gbps |
|
Fixed ports:
Access
Trunk |
1 x Gigabit Ethernet SFP
4 x multirate SFP for STM-1 can be upgraded to
4 x STM-4, 2 x STM-16 or 2 x IP/Ethernet
|
|
Synchronization:
Input
Ouput
Internal oscillator
Time Transfer option |
2.048 or 1.544 MHz, G.703.13
2.048 MHz, G.703.13
Stratum 3, (Optionally low phase noice (LPN) version available)
2 x 1 PPS + 2 x 10 MHz, 50 Ohm BNC, in or out
|
|
Environmental conditions:
Operating temperature
(short term)
Storage temperature
Relative humidity |
5 to 40 ºC (41 to 104 ºF)
-5 to 55 ºC (23 to 131 ºF)
-40 to 70ºC (-40 to 156 ºF)
10% to 90% (non-condensing)
|
|
Power:
Voltage
Dissipation |
-48VDC with built-in redundancy
115/230VAC with external converter
<80W fully equipped
|
|
Regulatory compliance:
Safety
Laser safety
EMC
CE marking |
UL60950-1; EN60950-1
CFR 21 1040.10/11
FCC 15 Class A; EN 300 386
93/68/EE
|
|
Management:
Element Management
Network Manegement |
Command Line Interface (CLI) and Web GUI
Nimbra Vision™ or 3rd party NMS over SNMP v1/v2c/v3
|